Remove the strap. Doing this incorrectly may damage the electronics of the watch! Search Catalog Search. Remove the watch back Most modern watches have snap-off back panels, which have small indentations to help you carefully pry off the cover. Reassemble the watch. Just slip the strap out of the slots on either side of the watch. Things You'll Need Small screwdriver. If your watch is buckled, unbuckle it and slide off the strap. Craftsmanship How to Change a Watch Battery. Better still, now that you know how to replace the batteries, you can confidently add more watches to your repertoire.
If you doubt your ability to change your watch battery, don't worry. You'll need tweezers and a small screwdriver to remove the dead battery and replace it with. Just slip the strap out of the slots on either side of the watch. Set the strap aside for now. Once you have your replacement battery, you will need to open the back of the watch to gain access to the battery compartment.
It may or may not be labelled 'AC'. When picking a replacement battery, get a battery with the same code. You can also buy one online.
Gently press down on the bottle cap using your foot until you hear a snapping noise. The crown refers to the tiny knob on the corner of the watch, used to wind the watch and set it to the right time.
Once the screws are removed, you can use your fingers to remove the back of the watch.
CORELDRAW X4 FULL VERSION
|Use the knife to gently push the back of the watch upward until you hear a popping noise.
How to replace my Timex Ironman Triathlon battery Quora
Battery Depot recommended cleaning the gasket before you put it back after changing the battery. Wear a pair of safety goggles while you work to prevent accidents. Find and remove the battery Once you see the existing battery, note which side is facing upward so you can replicate the placement when you insert the new part.
Go very slowly when using your tools and always use light, gentle motions. Pry off the back of the watch using a knife. You do not need to use a lot of force, as the battery is only loosely inserted in the watch and pops out easily.
Though the styles may vary greatly, most Timex watches are similarly constructed and require the same How to Remove Links from a Citizen Eco-Drive Watch. I found this link: Replacing the Battery on a Timex Ironman Watch but as other posters have suggested it is better to take it to a professional.
Press it into the center of the watch until you hear a small snapping noise. Reassemble the watch. If the crown is not already pushed in all the way, push it into the watch before taking apart the watch head.
Put the back of the watch back in place.
Insert the new battery Use the tweezers to place the new battery in its designated slot, and gently press down to secure its position.
Imane el bekkali
|Article Info This article was co-authored by our trained team of editors and researchers who validated it for accuracy and comprehensiveness.
Safety note: it is suggested using plastic rather than metal tools to avoid an electrical shock. Then, slide the strap back on. Use a small screwdriver, specifically designed for watches, to unscrew all the small screws on the side of the watch.
4bc Univ Replacing the Battery on a Timex Ironman Watch
This reduces the risk of damage. This means the watch back has snapped back into place and you can now put your strap back on the watch.
TAKE NOTE of how tight the screws are as you loosen them.
Just slip the strap out of the slots on either side of the watch.
Remember that your Ironman model may be different: some clips can be released using a pin on the opposite side without removing the screw, some have 2 screws, some have a clip with no screws.
Remove the strap. Place the back of the watch back in place. Did this article help you? You probably already did just by thinking about opening your watch's case.
GOVERNMENT FUNDED CHILDCARE COURSES IN KENT
|Just slip the strap out of the slots on either side of the watch.
Two types of mechanical watches exist: the manual hand-wind and the automatic wind. On this particular Ironman, there are 4 screws. It is usually a small exposed solder pad on the circuit board of the watch. There are plenty of jewelers who would be happy to replace the precious part for you.
Video: Open timex watch battery How to Open a Watch Case With Common Household Items Without Proper Tools
Add the new battery. This can be done by swabbing with a lint-free swab, but note that this may remove grease which is used to ensure the seal.